This wireless Headset provides superior audio quality, range and battery life. The headset can be configured to be worn over-the-ear or over-the-head. All the adapters are included to connect to your X16 phone with a 3.5 mm headset connector.
The headset’s base unit connects to your XBLUE X16 Phone using the provided adapter. On the base unit, slide the switch to #1. On the adapter cord, set the DIP switches (2) to #2 & #3
The headset is activated by pressing the “Feature” Button on the X16 phone and then pressing the digit 9. Feature Code 9 can also be programmed on a single button so the headset can be enabled and disabled by pressing the button. A headset must be plugged into the jack to enable or disable headset mode. The programmed button on the phone must be pressed to initiate and disconnect a call.
Depending on the age of your X16 phone, the unit may be equipped with either 2.5mm or 3.5mm headset jack. An adapter is required to facilitate the use of the 2.5mm or 3.5mm connector. Headsets sold by XBLUE include the adapter required for operation with your XBLUE.
This Headset Ships with a 3.5mm Headset Connector Adapter
Look at the label on the bottom of the phone to identify the connector type
Order this headset if your phone has the
“3.5HJ” indicator as shown in picture above
More information is available at xblue.com/headset-compatibility